/*************************************************************************** * _ _ ____ _ * Project ___| | | | _ \| | * / __| | | | |_) | | * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * * Copyright (C) 1998 - 2022, Daniel Stenberg, , et al. * * This software is licensed as described in the file COPYING, which * you should have received as part of this distribution. The terms * are also available at https://curl.se/docs/copyright.html. * * You may opt to use, copy, modify, merge, publish, distribute and/or sell * copies of the Software, and permit persons to whom the Software is * furnished to do so, under the terms of the COPYING file. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * * SPDX-License-Identifier: curl * ***************************************************************************/ #include "curl_setup.h" #if !defined(CURL_DISABLE_HTTP) && defined(USE_NTLM) && \ defined(NTLM_WB_ENABLED) /* * NTLM details: * * https://davenport.sourceforge.net/ntlm.html * https://www.innovation.ch/java/ntlm.html */ #define DEBUG_ME 0 #ifdef HAVE_SYS_WAIT_H #include #endif #ifdef HAVE_SIGNAL_H #include #endif #ifdef HAVE_PWD_H #include #endif #include "urldata.h" #include "sendf.h" #include "select.h" #include "vauth/ntlm.h" #include "curl_ntlm_core.h" #include "curl_ntlm_wb.h" #include "url.h" #include "strerror.h" #include "strdup.h" #include "strcase.h" /* The last 3 #include files should be in this order */ #include "curl_printf.h" #include "curl_memory.h" #include "memdebug.h" #if DEBUG_ME # define DEBUG_OUT(x) x #else # define DEBUG_OUT(x) Curl_nop_stmt #endif /* Portable 'sclose_nolog' used only in child process instead of 'sclose' to avoid fooling the socket leak detector */ #if defined(HAVE_CLOSESOCKET) # define sclose_nolog(x) closesocket((x)) #elif defined(HAVE_CLOSESOCKET_CAMEL) # define sclose_nolog(x) CloseSocket((x)) #else # define sclose_nolog(x) close((x)) #endif static void ntlm_wb_cleanup(struct ntlmdata *ntlm) { if(ntlm->ntlm_auth_hlpr_socket != CURL_SOCKET_BAD) { sclose(ntlm->ntlm_auth_hlpr_socket); ntlm->ntlm_auth_hlpr_socket = CURL_SOCKET_BAD; } if(ntlm->ntlm_auth_hlpr_pid) { int i; for(i = 0; i < 4; i++) { pid_t ret = waitpid(ntlm->ntlm_auth_hlpr_pid, NULL, WNOHANG); if(ret == ntlm->ntlm_auth_hlpr_pid || errno == ECHILD) break; switch(i) { case 0: kill(ntlm->ntlm_auth_hlpr_pid, SIGTERM); break; case 1: /* Give the process another moment to shut down cleanly before bringing down the axe */ Curl_wait_ms(1); break; case 2: kill(ntlm->ntlm_auth_hlpr_pid, SIGKILL); break; case 3: break; } } ntlm->ntlm_auth_hlpr_pid = 0; } Curl_safefree(ntlm->challenge); Curl_safefree(ntlm->response); } static CURLcode ntlm_wb_init(struct Curl_easy *data, struct ntlmdata *ntlm, const char *userp) { curl_socket_t sockfds[2]; pid_t child_pid; const char *username; char *slash, *domain = NULL; const char *ntlm_auth = NULL; char *ntlm_auth_alloc = NULL; #if defined(HAVE_GETPWUID_R) && defined(HAVE_GETEUID) struct passwd pw, *pw_res; char pwbuf[1024]; #endif char buffer[STRERROR_LEN]; #if defined(CURL_DISABLE_VERBOSE_STRINGS) (void) data; #endif /* Return if communication with ntlm_auth already set up */ if(ntlm->ntlm_auth_hlpr_socket != CURL_SOCKET_BAD || ntlm->ntlm_auth_hlpr_pid) return CURLE_OK; username = userp; /* The real ntlm_auth really doesn't like being invoked with an empty username. It won't make inferences for itself, and expects the client to do so (mostly because it's really designed for servers like squid to use for auth, and client support is an afterthought for it). So try hard to provide a suitable username if we don't already have one. But if we can't, provide the empty one anyway. Perhaps they have an implementation of the ntlm_auth helper which *doesn't* need it so we might as well try */ if(!username || !username[0]) { username = getenv("NTLMUSER"); if(!username || !username[0]) username = getenv("LOGNAME"); if(!username || !username[0]) username = getenv("USER"); #if defined(HAVE_GETPWUID_R) && defined(HAVE_GETEUID) if((!username || !username[0]) && !getpwuid_r(geteuid(), &pw, pwbuf, sizeof(pwbuf), &pw_res) && pw_res) { username = pw.pw_name; } #endif if(!username || !username[0]) username = userp; } slash = strpbrk(username, "\\/"); if(slash) { domain = strdup(username); if(!domain) return CURLE_OUT_OF_MEMORY; slash = domain + (slash - username); *slash = '\0'; username = username + (slash - domain) + 1; } /* For testing purposes, when DEBUGBUILD is defined and environment variable CURL_NTLM_WB_FILE is set a fake_ntlm is used to perform NTLM challenge/response which only accepts commands and output strings pre-written in test case definitions */ #ifdef DEBUGBUILD ntlm_auth_alloc = curl_getenv("CURL_NTLM_WB_FILE"); if(ntlm_auth_alloc) ntlm_auth = ntlm_auth_alloc; else #endif ntlm_auth = NTLM_WB_FILE; if(access(ntlm_auth, X_OK) != 0) { failf(data, "Could not access ntlm_auth: %s errno %d: %s", ntlm_auth, errno, Curl_strerror(errno, buffer, sizeof(buffer))); goto done; } if(Curl_socketpair(AF_UNIX, SOCK_STREAM, 0, sockfds)) { failf(data, "Could not open socket pair. errno %d: %s", errno, Curl_strerror(errno, buffer, sizeof(buffer))); goto done; } child_pid = fork(); if(child_pid == -1) { sclose(sockfds[0]); sclose(sockfds[1]); failf(data, "Could not fork. errno %d: %s", errno, Curl_strerror(errno, buffer, sizeof(buffer))); goto done; } else if(!child_pid) { /* * child process */ /* Don't use sclose in the child since it fools the socket leak detector */ sclose_nolog(sockfds[0]); if(dup2(sockfds[1], STDIN_FILENO) == -1) { failf(data, "Could not redirect child stdin. errno %d: %s", errno, Curl_strerror(errno, buffer, sizeof(buffer))); exit(1); } if(dup2(sockfds[1], STDOUT_FILENO) == -1) { failf(data, "Could not redirect child stdout. errno %d: %s", errno, Curl_strerror(errno, buffer, sizeof(buffer))); exit(1); } if(domain) execl(ntlm_auth, ntlm_auth, "--helper-protocol", "ntlmssp-client-1", "--use-cached-creds", "--username", username, "--domain", domain, NULL); else execl(ntlm_auth, ntlm_auth, "--helper-protocol", "ntlmssp-client-1", "--use-cached-creds", "--username", username, NULL); sclose_nolog(sockfds[1]); failf(data, "Could not execl(). errno %d: %s", errno, Curl_strerror(errno, buffer, sizeof(buffer))); exit(1); } sclose(sockfds[1]); ntlm->ntlm_auth_hlpr_socket = sockfds[0]; ntlm->ntlm_auth_hlpr_pid = child_pid; free(domain); free(ntlm_auth_alloc); return CURLE_OK; done: free(domain); free(ntlm_auth_alloc); return CURLE_REMOTE_ACCESS_DENIED; } /* if larger than this, something is seriously wrong */ #define MAX_NTLM_WB_RESPONSE 100000 static CURLcode ntlm_wb_response(struct Curl_easy *data, struct ntlmdata *ntlm, const char *input, curlntlm state) { size_t len_in = strlen(input), len_out = 0; struct dynbuf b; char *ptr = NULL; unsigned char *buf = (unsigned char *)data->state.buffer; Curl_dyn_init(&b, MAX_NTLM_WB_RESPONSE); while(len_in > 0) { ssize_t written = swrite(ntlm->ntlm_auth_hlpr_socket, input, len_in); if(written == -1) { /* Interrupted by a signal, retry it */ if(errno == EINTR) continue; /* write failed if other errors happen */ goto done; } input += written; len_in -= written; } /* Read one line */ while(1) { ssize_t size = sread(ntlm->ntlm_auth_hlpr_socket, buf, data->set.buffer_size); if(size == -1) { if(errno == EINTR) continue; goto done; } else if(size == 0) goto done; if(Curl_dyn_addn(&b, buf, size)) goto done; len_out = Curl_dyn_len(&b); ptr = Curl_dyn_ptr(&b); if(len_out && ptr[len_out - 1] == '\n') { ptr[len_out - 1] = '\0'; break; /* done! */ } /* loop */ } /* Samba/winbind installed but not configured */ if(state == NTLMSTATE_TYPE1 && len_out == 3 && ptr[0] == 'P' && ptr[1] == 'W') goto done; /* invalid response */ if(len_out < 4) goto done; if(state == NTLMSTATE_TYPE1 && (ptr[0]!='Y' || ptr[1]!='R' || ptr[2]!=' ')) goto done; if(state == NTLMSTATE_TYPE2 && (ptr[0]!='K' || ptr[1]!='K' || ptr[2]!=' ') && (ptr[0]!='A' || ptr[1]!='F' || ptr[2]!=' ')) goto done; ntlm->response = strdup(ptr + 3); Curl_dyn_free(&b); if(!ntlm->response) return CURLE_OUT_OF_MEMORY; return CURLE_OK; done: Curl_dyn_free(&b); return CURLE_REMOTE_ACCESS_DENIED; } CURLcode Curl_input_ntlm_wb(struct Curl_easy *data, struct connectdata *conn, bool proxy, const char *header) { struct ntlmdata *ntlm = proxy ? &conn->proxyntlm : &conn->ntlm; curlntlm *state = proxy ? &conn->proxy_ntlm_state : &conn->http_ntlm_state; (void) data; /* In case it gets unused by nop log macros. */ if(!checkprefix("NTLM", header)) return CURLE_BAD_CONTENT_ENCODING; header += strlen("NTLM"); while(*header && ISSPACE(*header)) header++; if(*header) { ntlm->challenge = strdup(header); if(!ntlm->challenge) return CURLE_OUT_OF_MEMORY; *state = NTLMSTATE_TYPE2; /* We got a type-2 message */ } else { if(*state == NTLMSTATE_LAST) { infof(data, "NTLM auth restarted"); Curl_http_auth_cleanup_ntlm_wb(conn); } else if(*state == NTLMSTATE_TYPE3) { infof(data, "NTLM handshake rejected"); Curl_http_auth_cleanup_ntlm_wb(conn); *state = NTLMSTATE_NONE; return CURLE_REMOTE_ACCESS_DENIED; } else if(*state >= NTLMSTATE_TYPE1) { infof(data, "NTLM handshake failure (internal error)"); return CURLE_REMOTE_ACCESS_DENIED; } *state = NTLMSTATE_TYPE1; /* We should send away a type-1 */ } return CURLE_OK; } /* * This is for creating ntlm header output by delegating challenge/response * to Samba's winbind daemon helper ntlm_auth. */ CURLcode Curl_output_ntlm_wb(struct Curl_easy *data, struct connectdata *conn, bool proxy) { /* point to the address of the pointer that holds the string to send to the server, which is for a plain host or for a HTTP proxy */ char **allocuserpwd; /* point to the name and password for this */ const char *userp; struct ntlmdata *ntlm; curlntlm *state; struct auth *authp; CURLcode res = CURLE_OK; DEBUGASSERT(conn); DEBUGASSERT(data); if(proxy) { #ifndef CURL_DISABLE_PROXY allocuserpwd = &data->state.aptr.proxyuserpwd; userp = conn->http_proxy.user; ntlm = &conn->proxyntlm; state = &conn->proxy_ntlm_state; authp = &data->state.authproxy; #else return CURLE_NOT_BUILT_IN; #endif } else { allocuserpwd = &data->state.aptr.userpwd; userp = conn->user; ntlm = &conn->ntlm; state = &conn->http_ntlm_state; authp = &data->state.authhost; } authp->done = FALSE; /* not set means empty */ if(!userp) userp = ""; switch(*state) { case NTLMSTATE_TYPE1: default: /* Use Samba's 'winbind' daemon to support NTLM authentication, * by delegating the NTLM challenge/response protocol to a helper * in ntlm_auth. * https://web.archive.org/web/20190925164737 * /devel.squid-cache.org/ntlm/squid_helper_protocol.html * https://www.samba.org/samba/docs/man/manpages-3/winbindd.8.html * https://www.samba.org/samba/docs/man/manpages-3/ntlm_auth.1.html * Preprocessor symbol 'NTLM_WB_ENABLED' is defined when this * feature is enabled and 'NTLM_WB_FILE' symbol holds absolute * filename of ntlm_auth helper. * If NTLM authentication using winbind fails, go back to original * request handling process. */ /* Create communication with ntlm_auth */ res = ntlm_wb_init(data, ntlm, userp); if(res) return res; res = ntlm_wb_response(data, ntlm, "YR\n", *state); if(res) return res; free(*allocuserpwd); *allocuserpwd = aprintf("%sAuthorization: NTLM %s\r\n", proxy ? "Proxy-" : "", ntlm->response); DEBUG_OUT(fprintf(stderr, "**** Header %s\n ", *allocuserpwd)); Curl_safefree(ntlm->response); if(!*allocuserpwd) return CURLE_OUT_OF_MEMORY; break; case NTLMSTATE_TYPE2: { char *input = aprintf("TT %s\n", ntlm->challenge); if(!input) return CURLE_OUT_OF_MEMORY; res = ntlm_wb_response(data, ntlm, input, *state); free(input); if(res) return res; free(*allocuserpwd); *allocuserpwd = aprintf("%sAuthorization: NTLM %s\r\n", proxy ? "Proxy-" : "", ntlm->response); DEBUG_OUT(fprintf(stderr, "**** %s\n ", *allocuserpwd)); *state = NTLMSTATE_TYPE3; /* we sent a type-3 */ authp->done = TRUE; Curl_http_auth_cleanup_ntlm_wb(conn); if(!*allocuserpwd) return CURLE_OUT_OF_MEMORY; break; } case NTLMSTATE_TYPE3: /* connection is already authenticated, * don't send a header in future requests */ *state = NTLMSTATE_LAST; /* FALLTHROUGH */ case NTLMSTATE_LAST: Curl_safefree(*allocuserpwd); authp->done = TRUE; break; } return CURLE_OK; } void Curl_http_auth_cleanup_ntlm_wb(struct connectdata *conn) { ntlm_wb_cleanup(&conn->ntlm); ntlm_wb_cleanup(&conn->proxyntlm); } #endif /* !CURL_DISABLE_HTTP && USE_NTLM && NTLM_WB_ENABLED */